 |
學經歷： | |||||||||||||||
| 學歷 美國賓州州立大學機械工程學系 博士 國立清華大學動力機械工程學系 碩士 國立清華大學動力機械工程學系 學士 經歷 國立台北科技大學能源與冷凍空調工程系 副教授2007/08~迄今 大葉大學機械與自動化系副教授2003/04~2007/07 大葉大學機械與自動化系助理教授2000/08~2003/04 國家太空中心衛星機械組副工程師1993/12~2000/08 美國賓州州立大學推進工程研究中心 研究助理 1988/08~1993/12 裕隆汽車工程中心分析所/熱學組副工程師1986/09~1988/07 海軍輪機學校輪機組/機械、損管海軍工程少尉教官1984/10~1986/08 工研院電子所印表機專案小組特約工程師1984/06~1984/09 |
||||||||||||||||
| 專業技術 |
||||||||||||||||
| 微流體力學 多相燃燒/熱傳 太空推進與系統工程 兩相流 |
||||||||||||||||
| 研發介紹 |
||||||||||||||||
| ◎ 期刊論文 | ||||||||||||||||
| 1. Yang, A. S.* and Chen, C. F., ‘‘Investigation of Attitude Adjustment Induced Sloshing Flows in a Satellite Propellant Tank,’’ Submitted to Aerospace Science and Technology, in preparation. (SCI/EI Journal) (NSC95-2221-E-212-020-MY2) 2. Yang, A. S.*, ‘‘Investigation of Liquid-Gas Interfacial Shapes in Reduced Gravitational Environments,’’ Submitted to International Journal of Mechanical Sciences, in review. (SCI/EI Journal) (NSC94-2212-E-212-009) 3. Yang, A. S.* and Hsieh, W. H., “Numerical Simulations of Three-Dimensional Hydrodynamic Focusing in a Flow Cytometer,” Journal of Mechanical Engineering Science, Proc Instn Mech Engrs, Part C, in review. (SCI/EI Journal) (NSC92-2218- E-194-021) 4. Yang, A. S.*, Yang, M. T., and Hong, M. C., ‘‘Numerical Study for the Impact of Liquid Droplets on Solid Surfaces,’’ Journal of Mechanical Engineering Science, Proc Instn Mech Engrs, Part C, Vol. 221, pp. 293-301, 2007. (SCI/EI Journal) (NSC95-2221-E-212-037-MY2) 5. Yang, A. S.* and Hsieh, W. H., “Hydrodynamic Focusing Investigation in a Micro-flow Cytometer,” Biomedical Microdevices, Vol. 9, No.2, pp. 113-122, 2007. (SCI/EI Journal) (NSC92- 2218-E-194-021) 6. Yang, A. S.* and Tsai, W. M., ‘‘Ejection Process Simulation for a Piezoelectric Micro-Droplet Generator,’’ Transactions of ASME, Journal of Fluids Engineering, Vol. 128, pp. 1144-1152, 2006. (SCI/EI Journal) (NSC92-2218-E-212-005) (This paper was ranked as the third of top 10 most downloaded research articles during December, 2006.) 7. Yang, A. S.*, ‘‘Plume Impingement Investigation Using Monte Carlo Computations,’’ Journal of Aerospace Engineering, Proc Instn Mech Engrs, Part G, Vol. 220, pp. 365-373, 2006. (SCI/EI Journal) (NSC92-2212-E-212-018) 8. Yang, A. S.* and Wu, C. Y., “Computational Design Approach to Hydrodynamic Focusing in a Flow Cytometer,” Lecture Notes in Bioinformatics(LNBI), Subseries of Lecture Notes in Computer Sciences (LNCS), Vol. 4115, pp. 336-341, 2006. (SCI/EI Journal) (NSC92-2218-E-194-021) 9. Yang, A. S.*, Cheng, C. H., and Lin, C. T., ‘‘Investigation of Droplet Ejection Characteristics for a Piezoelectric Inkjet Printhead,’’ Journal of Mechanical Engineering Science, Proc Instn Mech Engrs, Part C, Vol. 220, pp. 435-445, 2006. (SCI/EI Journal) (NSC92-2218-E-212-005) 10. Yang, A. S.*, Cheng, C. H., Tsai, W. M. and, Hsu, F. C. ‘‘Droplet Formation Studies for a Piezo- actuated Micro-injector,’’ Material Science Forum, Vols. 505-507, pp. 415-420, 2006. (SCI/EI Journal) (NSC92-2218-E-212-005) 11. Yang, A. S.*, Yang, J. C., and Hong, M. C., ‘‘Droplet Ejection Study of a Picojet Printhead,’’ Journal of Micromechanics and Microengineering, Vol. 16, pp. 180-188, 2006. (SCI/EI Journal) (NSC92-2218-E-212-005) (This paper has been electronically downloaded over 500 times from January to August, 2006. Only 3% of articles were accessed more than 500 times in this year across all journals from Institute of Physics Publishing.) 12. Yang, A. S., Huang, T. C., Hong, C. Y.*, and Kao, Y. F., ‘‘Determination of Aerodynamic Characteristics for Two-dimensional Airfoil,’’ Transactions of the Aeronautical and Astronautical Society of the Republic of China, Vol.35, No.4, pp. 387-391, 2003. (EI Journal) 13. Yang, A. S.*, and Kuo, T. C., ‘‘Plume Analysis of ROCSAT-1 Propulsion Subsystem,’’ Transactions of the Aeronautical and Astronautical Society of the Republic of China, Vol.35, No. 3, pp. 217-225, 2003. (EI Journal) (NSC92-2212-E-212-018) 14. Hsieh, W. H.*, Yen, Y. A., and Yang, A. S. ‘‘Use of Artificial Neural Networks in the Determination of Hydrogen/Oxygen Laminar Diffusion Flames at High Pressures,’’ Journal of The Chinese Institute of Engineers, Vol. 26, No. 4, pp. 409-422, 2003. (SCI/EI Journal) 15. Yang, A. S.*, Kuo, T. C., and Ling, P. H., ‘‘Application of Neural Networks to Prediction of Phase Transport Characteristics in High-Pressure Two-Phase Turbulent Bubbly Flows,’’ Nuclear Engineering and Design, Vol. 223, pp. 295-313, 2003. (SCI/EI Journal) (NSC92-2623-7-212-001- NU) 16. Yang, A. S.* and Kuo, T. C., ‘‘Determination of Plume Impingement Disturbance Characteristics for ROCSAT-1 Satellite,’’ Journal of Aerospace Engineering, Proc Instn Mech Engrs, Part G, Vol. 216, pp. 237-247, 2002. (SCI/EI Journal) (NSC92-2212-E-212-018) 17. Yang, A. S.* and Kuo, T. C., ‘‘Design Trades of Rocsat-1 Reaction Control Subsystem,’’ Transactions of the Aeronautical and Astronautical Society of the Republic of China, Vol.34, No.3, pp. 257-266, 2002. (EI Journal) (NSC91-2212-E-212-008) 18. Yang, A. S.* and Kuo, T. C., ‘‘Design Analysis of a Satellite Propulsion System,’’ AIAA Journal of Propulsion and Power, Vol.18, No.2, pp. 270-279, 2002. (SCI/EI Journal) (NSC91-2212-E- 212-008) 19. Yang, A. S.* and Kuo, T. C., ‘‘Blowdown and Fluid Hammer Studies for a Satellite Reaction Control Subsystem,’’ Journal of Aerospace Engineering, Proc Instn Mech Engrs, Part G, Vol. 215, pp. 291-299, 2001. (SCI/EI Journal) (NSC90-2212-E-212-029) 20. Kuo, T. C., Yang, A. S.*, and Chieng, C. C., ‘‘Bubble Size and System Pressure Effects on Phase Distribution for Two Phase Turbulent Bubbly Flows,’’ Journal of Mechanical Engineering Science, Proc Instn Mech Engrs, Part C, Vol. 215, pp. 121-132, 2001. (SCI/EI Journal) 21. Kuo, T. C., Yang, A. S., Pan, C., and Chieng, C. C.*, ‘‘Effects of Two Phase Turbulent Structure Interactions on Phase Distribution in Bubbly Pipe Flows,’’ Journal of Japanese Society of Mechanical Engineering, Vol. 42, No. 3, pp. 419-428, 1999. (SCI/EI Journal) 22. Kuo, T. C., Yang, A. S., Pan, C., and Chieng, C. C.*, ‘‘Eulerian-Lagrangian Computations on Phase Distribution of Two Phase Bubbly Flows,’’ Int. J. for Numerical Methods in Fluids, Vol. 24, No. 1, pp. 579-593, 1997. (SCI/EI Journal) 23. Yang, A. S.*, Hsieh, W. H., and Kuo, K. K., ‘‘Theoretical Study of Supersonic Flow Separation over a Rearward Facing Step,’’ AIAA Journal of Propulsion and Power, Vol. 13, No.2, pp. 324-326, 1997. (SCI/EI Journal) 24. Hsieh, W. H.* and Yang, A. S., ‘‘Combustion Processes of Hydrogen/Oxygen Diffusion Flames Under High-Pressure Conditions,’’ Journal of Chinese Society of Mechanical Engineering, Vol. 17, No. 6, pp. 525-536, 1996. (SCI/EI Journal) 25. Yang, A. S.*, Kuo, K. K., and Hsieh, W. H., ‘‘Combustion of LOX with Hydrogen under High Pressures,’’ AIAA Journal of Propulsion and Power, Vol. 12, No. 5, pp. 1001-1004, 1996. (SCI/EI Journal) 26. Yang, A. S. and Chieng, C. C.*, ‘‘Turbulent Heat and Momentum Transports in an Infinite Rod Array,’’ Transactions of ASME, Journal of Heat Transfer, Vol. 109, pp. 599-605, 1987. (SCI/EI Journal) |
||||||||||||||||
| 專利介紹 |
||||||||||||||||
| ||||||||||||||||
專利行銷平台
